AC service checklists by unit type
Every unit gets the same basics: filters, coils, drain, electrics, a running check. The unit type decides what else matters. Use this with the printable generator.
General guidance. The manufacturer's service manual for the model in front of you comes first, and refrigerant work is for qualified, certified technicians only. Print the matching sheet with the AC service checklist generator.
The basics for every unit
- Ask first. The customer often knows about the noise or the leak before you find it.
- Filters and coils. Dirty filters and coils cut airflow and make the unit work harder.
- Drain. A blocked drain is a common cause of water damage and callbacks. Confirm water actually flows out.
- Electrics. Loose or heat-marked connections are cheap to fix now and expensive later.
- Readings. Supply and return air temperature and running current, written down, give you something to compare with next visit.
Split units
The indoor filters and blower wheel collect dirt that you can see and clean. Check the swing motor and the drain pan, and look at the outdoor coil and fan. Wall-mounted units are the quickest to service, so skipped steps are usually the drain and the outdoor coil.
Cassette units
The unit sits in the ceiling, so the drain often relies on a condensate pump and float switch: test both. Remove the grille to reach the filter, and check the swing motors on each vane.
Ducted units
The filters are usually at the return grille or in the unit. Look beyond the unit: grilles, visible duct and its insulation, dampers and any zone controls. Check the blower motor, bearings and belt if there is one.
Window units
If you can remove the chassis, clean both coils properly. Check the slight tilt towards the outside so water drains, the seal around the frame, both fans and the capacitor.
VRF and VRV systems
Start with the error history on the outdoor unit and controller. Then check every indoor unit: filter, drain and communication. Inspect branch pipes, joints and insulation, and record operating pressures and temperatures as the manufacturer's procedure requires.
After the visit
Give the customer the signed sheet or a report, and record the next service date. Mukayef keeps each unit's history and shows who is due. Its technician job flow has this kind of checklist by unit type, with photos, parts, notes and a customer signature, and works offline.
See who is due this week.
Create your company, add your first customers, and see who is due.